AEROSOL
FIRE EXTINGUISHING SYSTEM
Description
To meet the safety needs of the current auto transportation industry, our company has launched the new auto gaseous fire-extinguishing products-The Auto Gaseous Fire-Extinguishing Tank. The product has gone through extensive market researches and numerous scientific experiments. Currently, the products allow for multiple startup modes (both manual and auto) and cater to different customer demands. Integrating new features such as small size, low weight, simple operation and maintenance of the device, the mini series products also inherit features of low-temp series products, which are highly efficient and secure.
Features
- Environmentally Friendly
- Simple to Install and Non Maintenance
- No Pressurised Cylinder or Pipe Work
- Cost Effective
- Tests and Certification
- NFPA COMPLIANCE
PARAMETERS
| IMAGE | MODEL | CAPACITY | PROTECTION SPACE | DISCHAGE TIME | DIAMETER | WEIGHT | SHELL MATERIAL | CERTIFICATES | SERVICE LIFE |
|---|---|---|---|---|---|---|---|---|---|
 | S-AAE-03 | 30g | 0.2m3 | 5s | 125x69x38mm | 285g | ABS | ISO, CE | 10years |
 | S-AAE-06-C3 | 60g | 0.6m3 | 10s | Φ63x100mm | 570g | SS304 | ISO, CE | 10years |
 | S-AAE-10-C2 | 100g | 0.8m3 | 10s | Φ100x100mm | 850g | ABS | ISO, CE | 10years |
 | S-AAE-10-CS3 | 100g | 0.8m3 | 10S | Φ69x290mm | 1130g | SS304 | ISO, CE | 10years |
| S-AAE-16-C3 | 160g | 1.6m3 | 10s | Φ76x135mm | 1070g | SS304 | ISO, CE | 10years |
 | S-AAE-25-C3 | 250g | 2.0m3 | 20s | Φ100x175mm | 1750g | SS304 | ISO, CE | 10years |
| S-AAE-50-C3 | 500g | 3.5m3 | 30s | Φ140x225mm | 2700g | SS304 | ISO, CE | 10years |
START MODEL : (PASSIVE) HEAT SELF-STARTUP
(Passive) Heat Self-start up: Using the fire detection harness pre-set in the protected area. Once the temperature in the protected area rises to the startup temperature(175±10oC )of the fire detection harness, the harness can start the extinguishing device in a second and release extinguishing gas to put out the fire.
APPLICATION SCOPE
REQUIREMENTS FOR THE INSTALL ENVIRONMENT
- (1) Temperature : -50oC℃ ~+90oC;
- (2) Humidity :≤95%;
- (3) Space : Protected Areas are closed or relatively closed
NOTE
The fire extinguisher is connected to fire fighting control pannel, it is one contents of the fire fighting system. In one system the most can connected 10 fire extinguishes, each fire extinguisher is series connected. If protection area is more than 10 fire extinguishes, should be divided to more system.
Stage 1
Fire is propagated by the ‘flame chain carriers’ O, H & OH
Stage 2
Pyrogen aerosol introduces potassium radicals (k) into the flame chain reaction
Stage 3
K radicals attach themselves to 0,H & OH and remove them from the flame chain without depleting Oxygen
AEROSOL FIRE EXTINGUISHING PRINCIPLES
After the fire-extinguishing device is activated, fire-extinguishing chemicals will produce fire-extinguishing gases through chemical reaction. And the effective constituents for fire-extinguishing are metallic oxide particles and inert gases. Under the effect of heat, the vaporized metal ions and positive ions in the fire-extinguishing gas will collect and then consume the active groups in the flames in large quantities. Also, the process will decrease the number of combustion radicals, absorb as well as neutralize them in an efficient way, so as to achieve fire extinguishing with chemical inhibitio
The condensed aerosol fire extinguishing device will immediately activate when fire danger occurs. The fire extinguishing gases will be quickly emitted by the device to achieve highly efficient fire-extinguishing, minimizing fire loss.
PRODUCT FUNCTION
STARTUP:
MANY SETS OF LINKAGE MODE:
(Passive) hot self-starting : Formed in series through L02/L03/L04 linkage interface. L02 / L03 / L04 linkage interface: a fitting that can link many devices which are (Passive)hot self-starting. L02 can Series connect two devices, L03 can Series connect three devices, L04 can Series connect four devices.
